During Production Inspection / In-Process Inspection

fatigue test of USB flash drive cap during an in-process production inspection performed by Luxiberg  Inspection in ShenzhenThis inspection service is the most demanded after the pre-shipment inspection. The During Production inspection ensures that your production is on the right track.

Its main purpose is to address quality issues before it is too late, giving you the time necessary to react and fix them correctly. The During Production Inspection is carried out when 20-60% of the production is completed.

The During Production Check has the same characteristics than the pre-shipment inspection and is offered in combination with the final random inspection to have a better control on your production.

In base of the buyer’s requirements, our inspector randomly checks workmanship quality, product appearance, sizes and weight, functionalities assortment, accessories, logos & labeling, packing way and packaging and do the needed tests. We also verify the raw materials, the semi-finished products and the planning of production.

Please note, that our inspectors have the required qualifications to advise the factory on the corrective actions to implement to improve the production quality.

A clear and detailed inspection report is sent to you within the 24 hours maximum upon the end of the inspection.

Our unbiased and detailed inspection reports include many detailed pictures taken by our well-qualified and experienced inspector all along the inspection process, thus showing you clearly all the aspects of your products and any possible issue.

Main benefits of the During Production Check

  • 60% of the finished products had gap and welding slag; and 70% of the unfinished products had obvious welding slag  Check the production status and identify the main problems that can occur during the production cycle.
  • Improve your control over production allowing timely correction of defects and improvements on quality.
  • Highlight actual or potential defects, flaws or discrepancies. Identification of possible delays.
  • Resolve the quality issues and deviations during manufacturing process to forestall further problems and ensure a smoothly running production.
  • Implement a corrective action plan if necessary without inducing a delay.
  • Assure that the mass production quality is the same as the reference sample approved by you
  • Verify if your order is on schedule.
  • Improve the production capacity planning and so avoid unnecessary costs and delays.
  • Avoid potentially catastrophic last-minute surprises in the production cycle.

During Production Inspection Service price: $189 in China, $299 in other Asian countries.

To receive a sample during production inspection report, please, send an email to inspection@luxiberginspection.com

Get a quote

Copyright © 2014 Luxiberg International All rights reserved

FAQ

Luxiberg Inspection website in Spanish

fatigue test of USB flash drive cap during an in-process production inspection performed by Luxiberg  Inspection in ShenzhenThis inspection service is the most demanded after the pre-shipment inspection. The During Production inspection ensures that your production is on the right track.

  • 60% of the finished products had gap and welding slag; and 70% of the unfinished products had obvious welding slag  Check the production status and identify the main problems that can occur during the production cycle.
Luxiberg Inspection website in Spanish

fatigue test of USB flash drive cap during an in-process production inspection performed by Luxiberg  Inspection in Shenzhen

  • 60% of the finished products had gap and welding slag; and 70% of the unfinished products had obvious welding slag 

fatigue test of USB flash drive cap during an in-process production inspection performed by Luxiberg  Inspection in Shenzhen

  • 60% of the finished products had gap and welding slag; and 70% of the unfinished products had obvious welding slag 
Luxiberg Inspection website in Spanish

fatigue test of USB flash drive cap during an in-process production inspection performed by Luxiberg  Inspection in Shenzhen

  • 60% of the finished products had gap and welding slag; and 70% of the unfinished products had obvious welding slag 

fatigue test of USB flash drive cap during an in-process production inspection performed by Luxiberg  Inspection in Shenzhen

  • 60% of the finished products had gap and welding slag; and 70% of the unfinished products had obvious welding slag 
Luxiberg Inspection website in French Luxiberg Inspection website in Spanish

fatigue test of USB flash drive cap during an in-process production inspection performed by Luxiberg  Inspection in Shenzhen

  • 60% of the finished products had gap and welding slag; and 70% of the unfinished products had obvious welding slag 

During Production Inspection / In-Process Inspection

fatigue test of USB flash drive cap during an in-process production inspection performed by Luxiberg  Inspection in ShenzhenThis inspection service is the most demanded after the pre-shipment inspection. The During Production inspection ensures that your production is on the right track.

Its main purpose is to address quality issues before it is too late, giving you the time necessary to react and fix them correctly. The During Production Inspection is carried out when 20-60% of the production is completed.

The During Production Check has the same characteristics than the pre-shipment inspection and is offered in combination with the final random inspection to have a better control on your production.

In base of the buyer’s requirements, our inspector randomly checks workmanship quality, product appearance, sizes and weight, functionalities assortment, accessories, logos & labeling, packing way and packaging and do the needed tests. We also verify the raw materials, the semi-finished products and the planning of production.

Please note, that our inspectors have the required qualifications to advise the factory on the corrective actions to implement to improve the production quality.

A clear and detailed inspection report is sent to you within the 24 hours maximum upon the end of the inspection.

Our unbiased and detailed inspection reports include lot of detailed pictures taken by our well-qualified and experienced inspector all along the inspection process, thus showing you clearly all the aspects of your products and any possible issue.

Main benefits of the During Production Check

  • 60% of the finished products had gap and welding slag; and 70% of the unfinished products had obvious welding slag  Check the production status and identify the main problems that can occur during the production cycle.
  • Improve your control over production allowing timely correction of defects and improvements on quality.
  • Highlight actual or potential defects, flaws or discrepancies. Identification of possible delays.
  • Resolve the quality issues and deviations during manufacturing process to forestall further problems and ensure a smoothly running production.
  • Implement a corrective action plan if necessary without inducing a delay.
  • Assure that the mass production quality is the same as the reference sample approved by you
  • Verify if your order is on schedule.
  • Improve the production capacity planning and so avoid unnecessary costs and delays.
  • Avoid potentially catastrophic last-minute surprises in the production cycle.

During Production Inspection Service price:
$189 in China,
$299 in other Asian countries.

To receive a sample during production inspection report, please, send an email to inspection@luxiberginspection.com

Luxiberg Inspection website in Spanish

fatigue test of USB flash drive cap during an in-process production inspection performed by Luxiberg  Inspection in Shenzhen

  • 60% of the finished products had gap and welding slag; and 70% of the unfinished products had obvious welding slag 
Luxiberg Inspection website in Spanish Luxiberg Inspection website in French